Räsvelg 5" FPV Frame

Out of stock

Räsvelg 5" - Race-ready corpse-swallowing instrument of winning

Räsvelg 5" - Race-ready corpse-swallowing instrument of winning


  • 190mm
  • 5" Props
  • 5mm thick replaceable arms
  • White Nylon Canopy (Can be dyed any color)
  • Only 75g

Rasvelg - Light but not fragile

Designed to be light, but not fragile

We spent extra time testing Räsvelg, because we needed to be sure the frame could take abuse. After several iterations with various arm widths, carbon fiber thicknesses, and configurations, we finally arrived at a 5" version with 5mm replaceable arms.

The result is that Räsvelg 5 weighs in at only 75g

Nylon Canopy

Nylon and carbon fiber

Räsvelg's canopy is made of insanely durable, 3D-printed white nylon. The material is stiff, yet pliable, resulting in heroic crash-resistance while still maintaining serviceability.

Though Räsvelg's canopies are white, you can dye them any color you like with standard nylon dyes.



Räsvelg was designed to have skinny, yet thick arms for the best possible gains in aerodynamics.

The result is a frame with less surface area, so more of the thrust created by your motors gets turned into forward movement.

Additionally, the canopy's open design creates the least amount of air resistance possible.


Battery strap: solved

We fly hard, and we break battery straps when that flying turns into a certain kind of crashing. Traditionally, replacing a battery strap in the field has always been hugely annoying, with most frames requiring you to weave the strap through small slots.

Räsvelg 5 fixes this with relief in the replacable arms that allows you to slide your battery strap straight through, no weaving required.


Räsvelg: The giant corpse swallowing eagle

The name Räsvelg comes from the Old Norse, Hræsvelgr, and a giant that takes the form of an eagle and flaps its wings at the end of the Earth to create wind currents.

It's also affectionaly known as "corpse swallower," because it does a bit of that too.


Compatible with the most common hardware

Räsvelg is compatible with the parts you'll see on most builds. However, Räsvelg requires the following:

  • Flight Controller: Any flight controller with 30.5mm mounting holes will fit
  • Motors: 22XX motors or any motor with standard 16x19 M3 mounting holes
  • ESCs: A 4in1 ESC is required in order to gain the benefits of Räsvelg's aerodynamics
  • Camera: Foxeer HS1177, RunCam Swift, RunCam Owl Plus, or other camera whose case is 25x25mm with screw nubs
  • VTX: Any VTX with a SMA pigtail

Räsvelg's included hardware lets you soft-mount mount your PDB and flight controller. The included o-rings help prevent yaw-twitching for those sensitive gyros and motors with N52 magnets.

More Information
Manufacturer Falcon Multirotors
Weight 75g
Copyright © 2016 PitchRollYaw. All rights reserved.