Garagecrab 4" Stretch FPV Frame

Out of stock

Garagecrab 4" Stretch FPV Frame - Designed to regularly crash into concrete.

Garagecrab 4" Stretch FPV Frame - Designed to regularly crash into concrete.


  • Max prop size 4"
  • Stretch X design
  • 4mm bottom plate
  • 3mm top plate
  • Designed around a 20x20mm flight controller
  • You can use a standard 30.5mmx30.5mm FC & 4-in-1 ESC with a hardware kit (sold seperately)
  • Only 52g

Garagecrab - 4 inch props coming back in a big little way

4" props are coming back in a big little way

It's the season of the 4", 1407 racer. With modern 1407 motors capable of massive amounts of thrust for their small size and weight, Garagecrab can be built to more nimble, more durable, and just as fast as a 5" frame. 4" is back, baby.

With a 54g base frame weight and motors that weigh between 12g and 15g, Garagecrab builds with 1407 motors end up easily under 290g with a 1000mAh battery, and lighter than 250g with a 500mAh battery.

Build it how you want it

Build it how you want it

The stretch-x geometry gives you that stable feel and anti-propwash benefits, and the host of build options give you flexibility in choosing how you want your quad to fly, whether it's top mount battery for a more true center of gravity, or bottom mount with a Gargecrab GoPro Session Bumper or Gargecrab GoPro Session Wedge on top, Garagecrab can be built either way with the included hardware.

GoPro Ready

GoPro Ready

Whether you're on 1407s or 1608s, Garagecrab can haul a GoPro. Get the Gargecrab GoPro Session Bumper.


Not afraid to accessorize

With a host of TPU accessories such as booties, battery protectors, top plate bumpers, and GoPro mounts, Garagecrab is thrives in unforgiving indoor race venues such as parking garages and warehouses.


Designed for tiny hardware, but works with anything

Garagecrab was designed around flight controllers with a 20x20mm mounting hole pattern, but has plenty of room for your favorite RX, VTX, and camera.

  • Flight Controller: Flight controllers such as the Omnibus Nano with M3 20x20mm mounting holes are preferred for protection and ease of mounting, but Garagecrab can support M3 30.5x30.5mm mounting holes with an optional 30.5mm hardware kit (8x 5mm standoffs, 4x 17mm standoffs, 4x 25mm screws + spares)
  • Motors: 14XX, 17XX, 16XX, and 18XX motors or any motor with standard 12x12 M2 mounting holes, such as the Tornado 1407 3600kV
  • ESCs: Small ESCs such as EMAX Bullet 20A
  • Camera: Foxeer HS1177, RunCam Swift, or other camera whose case has 25x25mm with screw nubs
  • VTX: Smaller VTX such as TBS Unify Pro preferred
  • Lens: Any lens
  • Battery Strap: Garagecrab is designed for 180x16mm battery straps

More Information
Manufacturer Falcon Multirotors
Copyright © 2016 PitchRollYaw. All rights reserved.